FSonar targeted at Orward (FFS), although it is a key tool in the growing number of anglers boats, it is not exactly Magic Bullet People (who do not have units), they think. This requires careful lights, a lot of practice and must be adapted to the fishing player’s style to really pay dividends.
Tommy Kemos from Wisconsin is one of Walleye’s most consistent anglers and said that his Garmin really helps him compete in today’s advanced technology, but there are some keys to properly apply this technology.
One thing to consider is whether to start a FFS converter on a trolling engine or a separately installed pole.
“The most effective configuration for me is to have a LiveScope transducer in a trolling engine, which in the case of Garmin Kraken is the only torch that will accommodate the LiveScope converter,” said Kemos. “You are without the apply of your hands. The possibility of following fish and lure work is a great matter.
“Configuration mounted on a pole is great for watching fish, but it is difficult to at the same time fish and follow the fish; you need a third arm. If you don’t have Mount TM on the scissors, the pole really is the only option.”
Kemos said that if someone likes a “castle”, anglers can fish from the back of the boat and apply the attachment on the pole.
“I use the mountaineer Foresight on my Pawęży,” he said. “It is permanently repaired, but it gives me viewing without using hands. It has a wireless controller that I maneuver with a foot. You can also mount it on a pole attachment.”
More information about fishing with outdoor messages:
In the case of travelers to Canada, the tariff plan announced at the beginning of March is excluded
Do you want to buy a Sonar directed forward? Here is everything to consider
Starting work
Kemos also said that there are several key tips to start a angler.
“Calibrate your compass, and then get attached to the docking station and scan for agreed purposes to make sure your goal is accurate,” he said. “Don’t worry that you have a bright screen. The more mess you filter, the less data you will receive. It can also slow down the device.”
Kemos also suggested to try to scan as far as possible, while seeing your bait.
“Fish and your lure are easier to see when your range is enlarged, but in many lakes the fish will not let you get closer,” he said. “In vegetation I run from 30 to 60 feet, while in open water I run from 90 to 110 feet.”
Many manufacturers are Creating lures that should be “better” on the FFS unit. Is this noise or does it really add experience?
“It’s debatable,” said Kemos. “There are optimized lures FFS, which have been designed to have more control and pendant, but the correct tuning and mounting the device helps the most in detecting lures.”
Batteries
How about battery sources for sonar units that can be 10-, 12-inch or even larger? Do the batteries have to be updated to handle the draw of these monsters?
“I powered the Optima batteries boat,” he said. “I run AGM for home battery and lithium battery for my electronics. The most important thing is to have good stable voltage and pure power to the device.”
When Kemos sees fish, he knows that it is ineffective to spend too much time on one, if he does not undertake to bite.
“Just because you see them, it doesn’t mean that you can catch them,” he said. “Make a few cast and go on.”
Brian Brosdahl is a guide from Minnesota, who in most situations also prefers to install his FFS converter for trolling engine.
“One of the biggest advantages of Minn Kota Ultrex is turning the super-fast to cover the depth with a cable drive,” he said. “The transducer behaves like an extension of the foot, and when browsing forward it is popular to sweep there back when moving forward.”
Ultrex comes out of the water when it is raised in the scissor style, allowing the anglers to mount a transducer on the shaft, but most of the independent engines and manual sliding engines are not genial to mount the shaft and can damage or cut the cable on the recipe.
“I also use Minn Kota Targetlock, which is a pole mounted on a troll engine with a steering system, which allows you to move regardless of the engine, when they anchored in the point castle,” said Brosdahl.
This means that the angler has a second foot control and a pilot who directs the converter to the right or left so that you can turn your foot and throw. So the angler will have to monitor the screen, the trollPedal on the foot foot and the target pole – a discouraging task as long as you get used to it.
It requires practice
Brosdahl agreed with Kemos that manual down-rod and transducer may be less proficient than the above-mentioned and is the best for scouting near the steering wheel or Rumpla’s area.
Brosdahl advises practicing with FFS to fully apply it.
“Understanding the interpretation of Sonar in what he sees” requires time and representatives. “Identification of fish versus rocks, weeds and wood takes time, as well as estimating the size of the characters on the screen compared to how big the fish are.”
Finally, the angler can distinguish lures, bluegills, walleyes or suckers.
“I tell people to exercise on shallows when you can see objects or fish, and then compare Sonar readings with what you saw in the water,” said Brosdahl. “When using FFS, be careful because when you see fish, you must be able to slow down without running, especially in clean water.”
Kemos and Brosdahl said that it will remain so far from target fish is crucial.
“Finally, practice the exact distances,” said Brosdahl. “Many professionals will measure and set buckets to throw 20 to 80 feet in the driveway, so when you will have a better picture on the water and go to the target fish Understanding the distance. “
What every brand calls its FFS:
Humminbird:
Lowrance:
Garmin:
